How to Stop an Overflowing Toilet

bathroom

An overflowing toilet can be able to bring some diseases with it and thus why you should take some measures to avoid it at any cost. The following are steps which can be used to curb the situation;

Step 1: Turn off the Water Valve

Most toilets have a supply line that should be located around the bottom part of the bowl. Once you spot the valve, turn it off as quickly as possible. If you can’t seem to find the valve in time, move on to the next best thing you can do. Check www.toiletgeek.com to learn more.

Step 2: Take off the Tank Cover

The first thing you should do is to press down on the flapper valve, a rubber piece at the bottom center of the tank. Next, look for the floater, which usually looks like a plastic ball or cup. Lift the floater high enough to make the water stop running.

Step 3: Fix the Floater

Adjust the floater mechanism so that the floater sits much lower in the toilet tank. This ensures that the tank will fill with less water, preventing any future overflows. Look for the chain attached to the floater, and make sure that it is not broken or tangled, either.

new bathroom

Step 4: Watch the Bowl

The water level should start to drop slowly but surely. Once it’s back to normal, it should be safe to let go of the floater. However, keep an eye on the bowl and make sure that no overflow occurs. If it happens again, lift up the floater once more and turn off the toilet’s water valve.

Step 5: Remove Excess Water

Most of the time, toilet overflow is caused by blockages in the drain. First, put on your rubber gloves and remove the excess water using a small cup or bucket. If the water is clean, pour that excess water into the sink. If it’s dirty, keep it in a plastic bucket in the meantime. You can flush it back down the toilet once you’ve fixed the toilet.

Step 6: Unclog the Toilet

Get a toilet plunger, and align it over the hole in the center of the toilet. Then, push down slowly to apply light pressure. Gradually pick up the pace, pushing down harder each time, until you dislodge whatever is blocking the drain.

Step 7: Test Your Toilet

Turn the water valve back on and keep an eye on the toilet bowl. If the water level goes back to normal, then you’ve solved the problem. If it doesn’t, it may be time to call in professional plumbing service.

tp on a roll

Conclusion

If you have more than one toilet in your home, take some time to check if the other toilets are overflowing as well. If only one toilet has the issue, then it should be an isolated incident.

However, if more than one toilet is affected, your whole system’s drain may be clogged. If it looks like you have overflowing toilet plumbing, consider asking help from a plumber to fix it all up. If you make use of the above tips, you will be able to curb cases of an overflowing toilet.